Five Seat Keys Replacement Projects For Any Budget
Seat Alhambra Key Problems
Seat's jumbo family MPV is one of the best in its class when it comes to keeping resales value. With a new model currently on sale the family MPV jumbo is more impressive.
There are many reasons why the key fob won't work as expected, including a dead coin battery, damage to the receiver module, or signal interference. This article will guide you through the steps necessary to fix it.
Water Damage
If your key fob for the seat alhambra survives the wash cycle or dip in the ocean or a pool then it's got a waterproof chip. However, don't do it often since prolonged exposure to water increases the chance of the key fob being damaged. If the key fob ceases to functioning after exposure to clean tap water or rain, simply take out the battery, clean the electronic component with paper towel and allow it to dry completely before putting it back in. If you are exposed to soapy or salty water, it is recommended that you clean the chip using isopropyl alcohol or a electronic cleaner prior to attempting to insert the battery back in.
Faulty Receiver Module
If you have tried a new button cell battery and the key fob still isn't locked or unlocking, it's likely that your receiver module has discovered a problem. The positive side is that this is a simple and inexpensive repair, you can simply remove the battery 12 volts for about a couple of minutes (first remove the negative cable, then press the horn button several times) to remove any remaining electricity and then reconnect it in reverse order e.g. positive cable first and then negative.
ESP Warning Light If the ESP warning symbol flashes this is normal and means that the vehicle is driving on terrains where the traction between the road surface and tyres is not ideal like snow, gravel or a lot of surface water. If the ESP light is always flashing, it is a sign there is a flaw in the system. This can be identified with a iCarsoft i908 seat OBD code reader kit. It will give you a detailed fault description.
Dead Coin Battery
One of the most common reasons for the seat alhambra key not working is a dead coin battery. The key fob is powered by a tiny button-cell battery. Replace it with a new battery that has the exact dimensions, voltage and specs as the original. When replacing the battery on the key fob remove the metal clips and make sure that the contacts of the key fob are free of corrosion and clean.
If the key fob was exposed to water (such as soapy or rain tap water) it is recommended that you remove and clean the chip using an electronic cleaner or isopropyl ethanol prior to installing a new battery. The chip may be permanently damaged by moisture. If the key fob still not working after replacing the battery, it may be necessary to replace the entire key fob.
Faulty Receiver Module
If your key fob stopped working after replacing the battery, but it didn't perform, or stopped working suddenly the receiver module could have encountered a problem. seat leon car key battery receives the radio frequency signals from the remote keyfob and transforms them into electrical signals which are then used by other modules inside the car.
If the receiver module has developed a fault that prevents it from responding to any of the commands received by your remote key fob. In this scenario you'll be required to visit a service to reprogram your key fob and a new receiver module.
The key fob is encased with rubber to stop water from getting into the electronic chip. If you immerse your key fob in soapy water or salty ocean water, the chip inside could be damaged. You can attempt to clean the chip by using isopropyl Alcohol to rub it or electronic cleaner, however If your key fob isn't working after all this, you'll have to purchase a replacement.
If the keys are in a pair but the receiver module has developed a fault you can try to reboot all of the electronics on board by removing the battery at 12 volts for a short period of time. Connect the battery in reverse (negative cable to positive first). This will reset the on-board electronic circuits and restore their functionality.
Faulty Electronic Chip
The key fob contains tiny electronic chips that sends a signal to the receiver module every time the key is used. If the signal doesn't match the one the car has stored the immobilizer will turn off and prevent the vehicle from starting. If, however, the key fob isn't working and you cannot reprogram it the issue could be due to a defective chip.
The chip in the key fob could need to be changed in order to get it working again. The best way to do this is to remove the key from its housing and then using a pin needle to connect with each of the retaining clips made of steel. If they are corroded or broken, you will require replacement to allow the remote control to function. Make sure that the replacement batteries are of the same size, voltage and specifications as the original.
Seat Alhambra is a well-known and well-designed model, can be troublesome due to specific parts or equipment. For example, some owners have experienced issues with the automatic climate control system, which could be faulty and get stuck in one particular setting. Similarly, the infotainment system has also been known to malfunction and freeze screens.